The Ursa Baby Pro is another great pod vape by Lost Vape.
This version takes the Ursa Baby and adds some upgrades.
The main difference is the addition of the 0.42-inch OLED screen. Plus using the fire button you can adjust the output from 5-25W.
The display shows the wattage selected (this is variable wattage– I will tell you how to adjust further on in the review), to the right of the wattage is the padlock symbol, and then a “W” to denote Wattage.
It is supplied with a fixed coil Ursa pod which has a 0.6ohm coil plus a removable coil pod that uses the UB Mini coil range. You get the S1 0.8ohm coil in the kit too.
The coil is a push-in / pull-out style so by looking at the pod base instead of contacts you have the actual base of the coil. A reminder – try not to pull the coil out with a full pod.
On the front of the pod is the oddly located fill port. It is covered by an easy-to-remove silicone cover which you lift up where the arrow points. A small cut-out is provided to help lift up the cover and it can be swung out of the way.
Inside the device is a 900mAh battery which has USB Type C charging at up to a 2A charge rate.
On the left of the front is the airflow adjustment slider, this only protrudes about 1mm from the body so will hopefully not catch on pockets and bags. It has good resistance to movement so shouldn’t move on its own.
On the side of the mod is the USB port and the lanyard attachment hook – shown above is the lovely ribbon-style lanyard in position.
On the right side of the front nestled within the textured panel is the small screen which is bright and clear but a bit crowded.
Dimension: 46.5*15.2*71.6mm
Tank Capacity: 2.5ml (2ml for TPD version)
Battery: 900mAh
Battery Voltage: 3.2V-4.2V
Power Range: 5-25W
Body Material: Zinc-Alloy
Powered by LOST VAPE QUEST Chip
Output Voltage: 1.7V-3.9V
Type-C cable: Supports 5V 2A
Airflow: Easy access airflow valve
Safety Features:
Short-Circuit Protection /Weak Battery Protection / Over Heat Protection
1 x Lost Vape Ursa Baby Pro Pod Device
1 x 0.6ohm 2.5ml Cartridge
1 x UB Mini S1 Coil 0.8ohm
1 x Empty Cartridge
1 x USB-C Cable
1 x Lanyard
1 x User Manual
1 x Warranty Card
