This new member OXVA Xlim C is a refreshing variation of their popular line of pod systems.
So what does the OXVA Xlim C bring to the table that is different?
The battery capacity is the same as previous versions at 900mAh and USB Type C charging at up to 2A is provided. According to OXVA, you can charge up to 80% in only 30 minutes.
The output is specified as 25W maximum but there are 3 levels of power output to select. These power levels depend on the coil installed…
As mentioned above this time you can change the coils – there are 3 different coils available 0.6ohm, 0.8ohm, and 1.2ohm. You get the 0.6 and 0.8ohm included in the kit.
On the front of each Xlim C device is the brand logo and a textured button.
An “X” shaped LED located on the fire button displays the power selected plus indicates the battery charge remaining. The fire button allows for power adjustment, and manual firing (auto draw is also provided) and you can also lock the button too.
The right side of the device sports the model name and the airflow control slider. With three airflow holes, you can easily adjust your device to your preferred MTL or RDTL experience. Slide the window close to restrict the air and deliver a tighter draw.
The lanyard included is very interesting because there is nowhere to clip a traditional lanyard onto the device. Instead, the Xlim C lanyard has a silicon ring that you slide around the device. It’s held securely within this ring so you can carry the pod system hands-free around the house or at work without constantly losing it.
The OXVA Xlim C Pod offers side port filling, so you are less likely to make a mess. The refilling process shouldn’t take you more than a minute.
Output power: Max 25W
Cartridge capacity: 2ml/2ml(TPD)
Battery capacity: 900mAh
Material: Aluminium alloy+PCTG
Charging: DC 5V/2A, Type-C
Dimension: 114.5mm * 14mm * 24mm
Spec of Coils: KA1 MESH (0.6ohm/0.8ohm/1.2ohm)
1 x XLIM C Device
1 x 0.6ohm Cartridge (Pre-Installed)
1 x 0.8ohm Coil
1 x Type C Cable
1 x Lanyard
1 x User Manual