ThunderHead Creations Artemis RDTA 24mm

ThunderHead Creations Artemis RDTA

• Brand: ThunderHead Creations
• Unit: set
• Type: RDTA
  
• Net Weight: 70(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

ThunderHead Creations Artemis RDTA is a Top coiler RDTA created in collaboration by Thunderhead Creations and Youtuber Tony Vapes. It is an exquisite single-coil top coiler with excellent vapor performance and unparalleled deliciousness. With its diameter of 24mm the Artemis RDTA can be combined with a variety of battery carriers and mods. The high-quality Artemis RDTA has stylish engraving elements on the exterior and continues to the interior. The top is 810 wide hole Drip Tip made of resin. After removing the top cover, a spacious and column-free single-coil platform will appear, allowing larger coils to be constructed. The deck of Artemis RDTA is a single screw postless build deck, where you can emit steam through a single coil winding, which can also be composed of thicker wires or special wires. Just two steps to easy coil building. The Coil leg trim tool is included in the package, so the coil can be corrected to the desired length.

In addition, the filling volume of Artemis RDTA is 2ml, and the liquid is absorbed through four German wicks made of stainless steel by capillary action. When the liquid level is low, after removing the top cap, the tank is filled using a top fill system. Finally, the design of the airflow determines the performance of the atomizer in DL vaping, so Artemis RDTA adopts variable air volume adjustment with a honeycomb design on both sides of the top cover. The airflow can be adjusted individually according to your preferences. From the almost open draw to the restricted DL, the air holes are also directly aligned with the coil. The supplied BF(bottom feeder) pin also allows the Artemis RDTA to be used with Squonk Mods. In this case, the filling is done through the 510 connector from below.

Features

• Single Screw Postless Build Deck

• 2ml Filling Capacity

• Wide Slot Side Fill System

• Adjustable Side Airflow

• 26 Holes Honeycomb Airflow Design

• 4-Germany Wicking Steel Structures

• Dual Airflow Cap Design For Great Flavor

• 810 Wide Bore Drip Tip

• Usable as RTA and bottom feeder

• Designed for DL, easy to adjustable

1 x Artemis RDTA

1 x Spare Glass

1 x Hexagon Screw

1 x Slot Screw

1 x Hexagon Screwdriver

1 x Slot Screwdriver

1 x BF Pin

1 x Coil Leg Trim Tool

1 x Spare Ceramic Insert

2 x Spare Spring

1 x Spare Wicking Steel

1 x Organic Premium Cotton

2 x 4-Core Fused Clapton Coil 0.25 ohm

Spare O-rings

1 x User Manual

1 x QC Card

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!