Anlerr Huuka Electric Dab Rigs and E-Nails | Wax vape Kit 1800mAh

Anlerr Huuka Kit

• Brand: Anlerr
• Unit: set
• Type: Vaporizer
  
• Net Weight: 350(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Anlerr Huuka Kit is a small dry herbs atomizer that you can easily hold in your hand. As a mature evaporator, it is independently designed by ANLERR and belongs to the non-combustion concentration evaporator. It's powered by a 1800mAh Li-Ion battery that guarantees you use longer. In addition, an indicator light on the unit shows you the battery level, with one bar for 25%, two bars for 50%, three bars for 75%, and four bars for 100%. Through it, you can know when you need to charge. It also comes with better temperature control from 500°F-600°F. Equipped with a ceramic heater can help you better heat the dry herbs. Combining a replaceable safety mouthpiece, which is made of glass. There are three colors for you to choose from.

Features

• 1800mAh Li-Ion Battery

• Indicator Light

• Battery Level

• 500°F-600°F Temperature Control

• Ceramic Heater

• Replaceable Safety Mouthpiece

1 x Huuka Battery brain

1 x Glass Mouthpiece

1 x Glass cup

1 x Glass smoke intake pipe

2 x Ceramic cup atomizers

1 x USB line

1 x Earpick

1 x Cotton swab

1 x Manual

STEP 1: Fully charge the device before first use. The power light will flash while charging, and turns off automatically when complete.

STEP 2: Adding water: Fill the Huuka base with water, We recommend filling to the halfway point of the beaker base. But feel free to add less water to achieve your preferred percolation. Do not overfill past halfway point.

STEP 3: Turn On/ Off: Press the power button 5 times continuously to turn on/off the device. The bottom led will flash 5 times in white light when it’s turned on. And the bottom led will flash 5times in red light when it’s turned off. It will have a temperature memory function(It will be at the temperature you set last time when you turn on the device).

STEP 4: The power button LED lights to indicate different battery levels: four grid-100%, three grid-75%, two grid-50%, one grid-25%. The LED will flash while charging. All four-grid LEDs will be lightened on when fully charged.

STEP 5: Three temperatures: Bottom led Green: 3.4V 500°F; Bottom led Blue: 3.6V 550°F; Bottom led Purple: 3.8V 600F

STEP 6: Sesh Mode: Long press the power button for 3 seconds. Then will active 35 seconds ‘sesh mode’ (5seconds pre-heat time then 30seconds warm time. The bottom Led will flash when pre-heat. Bottom LED keeps lighting on when it’s ready to use after pre-heat time ). then it will be in standby mode after 35seconds of sesh mode.

STEP 7: Temperature Switch: You can press the power button 3 times continuously to switch the temperatures you want in sesh mode. Every time you switch the temperature, the device will restart the 35s sesh mode.

STEP 8: Abnormal prompt: Bottom led flash 8times with red light indicates short-circuited. The power button flash 10 times indicates a low battery and needs to be charged.

STEP 9: The device will be turned off automatically if without any cooperation in 5minutes.

3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!